Traffic studies scoped to what the agency asked for.
Traffic impact analysis, SB 743 VMT screening, parking and site access studies, and traffic control plans for development projects, managed with the rest of your civil package.
Start with what the city is actually asking for.
A correction letter, a condition of approval or a planner's email often says a traffic study is required and stops there. The study the agency wants could be a trip generation memo, a VMT screening letter, a parking study or a full traffic impact analysis, and the difference in cost and schedule is large.
Send us the comments and the site plan. We read what the agency is asking for, confirm the scope with its staff where needed, and quote the study that answers it. Traffic work is managed with the grading, drainage and utility design, so the site plan and the analysis stay consistent.
Traffic engineering is available throughout California and in Nevada, Utah, Texas and Montana. Ask about your project location.
- Traffic impact analysis (TIA)
- SB 743 VMT screening and analysis
- Trip generation memos
- Parking demand and shared parking studies
- Queuing, site access and circulation studies
- Signing and striping plans and traffic control plans
- Agency scoping and comment responses
What the traffic scope covers.
Traffic impact analysis
- Scoping with agency staff before work starts
- Traffic counts and data collection
- Trip generation, distribution and assignment
- Intersection and roadway operations analysis
- Mitigation and fair-share recommendations
- Signed and stamped report with appendices
VMT under SB 743
- Screening against the lead agency's adopted thresholds
- Full VMT analysis where screening does not clear the project
- Mitigation and travel demand management measures
- Screening letter or VMT memo for the CEQA document
Trip generation and parking
- Trip generation memos based on ITE rates
- Existing and proposed use comparisons for a change of use
- Parking demand studies
- Shared parking analysis for mixed-use sites
- Supporting analysis for parking reduction requests
Site access and circulation
- Driveway location, spacing and sight distance
- Swept path exhibits for fire, trash and delivery vehicles
- Queuing analysis for drive-throughs, car washes, gas stations and schools
- On-site circulation, stacking and loading review
- Signal warrant analysis per the California MUTCD
Signing, striping and traffic control
- Signing and striping plans for parking lots, private streets and frontage improvements
- Traffic control plans for encroachment permits
- Construction traffic management plans
- Pedestrian routing, staging and phasing exhibits
Agency support
- Review of city comments and conditions of approval
- Scoping memos and study area agreements
- Responses to plan check and entitlement comments
- Documentation of compliance with traffic conditions
Common triggers and what the agency asks for.
Thresholds and study requirements are set by each agency and vary by jurisdiction. Send the site plan and the jurisdiction, and we will confirm what applies before you commit to a scope.
| What triggers it | The agency usually asks for | Stage |
|---|---|---|
| Conditional use permit, zone change or general plan amendment | Traffic impact analysis | Entitlement |
| CEQA review: exemption, IS/MND or EIR | SB 743 VMT screening or analysis | Entitlement |
| Project above the agency's peak hour trip threshold | Traffic impact analysis or focused study | Entitlement |
| Change of use that increases trip generation | Trip generation comparison or focused study | Planning or building permit |
| New or modified driveway on an arterial or Caltrans route | Site access and sight distance study | Site plan review |
| Parking reduction or shared parking request | Parking demand study | Entitlement |
| Drive-through or high-turnover site | Queuing analysis | Site plan review |
| Work in the public right-of-way | Traffic control plan | Encroachment permit |
| Construction on hillside or constrained streets | Construction traffic management plan | Grading or building permit |
Projects that get conditioned for a traffic study.
Change of use
A warehouse converted to a banquet hall, an office converted to medical or a retail space converted to a drive-through can trigger a study even when the building footprint does not change.
Residential and mixed-use development
Tract maps, multifamily and mixed-use projects going through entitlement or CEQA review.
Drive-throughs, car washes and gas stations
Queuing, stacking and driveway access for high-turnover sites.
Commercial and retail sites
Trip generation, parking and access studies for new buildings and tenant changes.
Schools, childcare and assembly uses
Pick-up and drop-off operations, parking demand and event traffic.
Work in the public right-of-way
Traffic control plans for encroachment permits and construction traffic management on hillside or constrained streets.
From the first comment to the final response.
- 01
Send the comments
Share the site plan, the proposed use, the jurisdiction and any agency comments or conditions.
- 02
Scope and fee
We confirm which study the agency requires and reply with a written scope, fee and schedule.
- 03
Agency scoping
Where required, the study area and methodology are agreed with agency staff before the analysis starts.
- 04
Counts and analysis
Traffic counts and data are collected, and the analysis is prepared to the agency guidelines.
- 05
Draft for your review
You receive the draft study before it is submitted.
- 06
Agency responses
We respond to agency comments on our scope through the review cycle.
What to send for a proposal.
We review the scope and reply with a written fee proposal and schedule.
Request a proposal- Project address and jurisdiction
- Site plan and proposed use
- Building area, unit count or seat count
- Agency comments, correction letter or conditions of approval
- Target submittal or hearing date
Traffic engineering FAQ.
The city says a traffic study is required. Which study do I need?
The comment often does not say. Send the correction letter or condition and the site plan. We identify the study the agency is asking for and quote that scope.
What is the difference between a traffic impact analysis and a VMT analysis?
A traffic impact analysis looks at how the project affects intersection and roadway operations, and cities use it to set conditions of approval. A VMT analysis measures the vehicle miles the project generates and is the transportation metric used for CEQA review in California under SB 743. Many projects need both.
Can a small project be screened out of a full VMT analysis?
Often, yes. Many California lead agencies have adopted screening criteria, for example for small projects, local-serving retail or sites near major transit. The criteria are set by each agency, so we check the project against the adopted thresholds and document the result in a screening letter.
How long does a traffic study take?
It depends on agency scoping, traffic count collection and the size of the study. The schedule is stated in the fee proposal once we have the site plan and the jurisdiction.
Who prepares and signs the study?
Our traffic engineering team prepares the study, and it is signed and stamped where the reviewing agency requires it. The engineer on the study is available to you and the agency for technical questions.
Can you handle traffic together with the civil design?
Yes. Traffic work is often delivered with grading, drainage, utility and mapping services, so the site plan and the traffic analysis stay coordinated under one contract.
Do you prepare traffic control plans for construction?
Yes. We prepare traffic control plans for encroachment permits and construction traffic management plans where the agency requires them.
Ready to send the plans?
Share the drawings and the project address. Fee and schedule are quoted per project after review.