Civil · MEP · Structural 2102 Business Center Drive, Suite 130, Irvine, CA 92612 Mon to Fri, 8am to 6pm (949) 482-7835
MEP · ORANGE COUNTY

MEP engineering in Orange County.

Mechanical, electrical and plumbing design and permit drawings for architects, designers and contractors building in Orange County.

Not ready to send plans?

Start with a free project review.

Leave your name and email. We reach out, look at what you have and tell you which engineering the project needs.

A project review is a scoping conversation. It is not engineering advice, and no design work begins until a proposal is signed.

MEP design for buildings across Orange County.

MEP is the largest share of our work, and Orange County is our home market. Recent projects include a restaurant tenant improvement in Costa Mesa, an industrial HVAC upgrade in Santa Ana, a warehouse retrofit in Anaheim, an event venue and a new freestanding restroom building in Irvine, and residential projects in Garden Grove, Los Alamitos, Fountain Valley and Orange.

A site visit to document existing equipment, panels and plumbing is simple to arrange from our office. Title 24 energy compliance forms are prepared with the mechanical and lighting design. Projects in the City of Irvine have their own page, linked below.

Our office is in Irvine. MEP engineering is available throughout California and in all 50 states. Our team travels to the site when the project needs it.

What we deliver
  • Mechanical, electrical and plumbing permit drawings
  • Load calculations and equipment schedules
  • Panel schedules and single-line diagrams
  • Kitchen exhaust, makeup air and grease interceptor design for food service
  • Title 24 energy compliance forms
  • Plan check responses on our scope
Scope

What we have designed in the county.

Restaurants and food service

  • HVAC for the dining room and kitchen
  • Kitchen ventilation and exhaust hood design
  • Makeup air systems and equipment layout
  • Grease trap sizing, riser diagrams and fixture schedules

Industrial and warehouse

  • Load verification and sizing for new rooftop units
  • Integration with the existing distribution
  • Power for the new equipment
  • MEP drawings for warehouse retrofits

Homes, additions and ADUs

  • HVAC layout and duct routing
  • Lighting, power and panel coordination
  • Plumbing for new fixtures and system extensions
  • Energy compliance documentation
Project types

Orange County projects we have designed MEP for.

Restaurants

Costa Mesa: MEP and structural design for a restaurant tenant improvement.

Industrial buildings

Santa Ana: an industrial HVAC upgrade. Anaheim: MEP for a warehouse retrofit.

Event and commercial space

Irvine: an event venue tenant improvement and a new freestanding restroom building.

Commercial remodels

Garden Grove: interior remodel and balcony addition at a commercial building.

Homes and additions

Garden Grove, Los Alamitos, Fountain Valley and Orange: MEP for new homes, additions and remodels.

ADUs

Seal Beach: MEP for a garage conversion to an accessory dwelling unit.

Regions served
IrvineAnaheimSanta AnaCosta MesaNewport BeachHuntington BeachGarden GroveOrangeFountain ValleyLos AlamitosLake ForestTustinFullertonMission Viejo
Get started

What to send for a proposal.

We review the scope and reply with a written fee proposal and schedule.

Request a proposal
  • Project address and building type
  • Square footage and number of stories
  • Scope: mechanical, electrical, plumbing or all three
  • Architectural plans in PDF, if available
  • Target submittal date
Common questions

MEP engineering in Orange County FAQ.

Do you provide MEP engineering across Orange County?

Yes. We are based in Irvine and prepare MEP design and permit drawings for projects throughout the county.

Can you provide only one discipline, such as electrical?

Yes. Mechanical, electrical and plumbing can be provided together or separately, depending on what the permit requires.

Is Title 24 prepared with the MEP drawings?

Yes. Title 24 energy compliance forms are prepared with the mechanical and lighting design. Field verification and acceptance testing are performed by others, typically arranged by the contractor.

Do you coordinate with the structural engineer?

Yes. Rooftop equipment, floor and wall penetrations and equipment anchorage are coordinated with the structural design. We can provide structural engineering under the same contract.

Do you design restaurant and food service projects?

Yes. Our Costa Mesa restaurant project included kitchen exhaust and makeup air, panel schedules and a single-line diagram, and grease trap sizing.

Ready to send the plans?

Share the drawings and the project address. Fee and schedule are quoted per project after review.